Nondestructive Testing Instrument
Basic Info
Model No.: GT102
Product Description
Nondestructive Testing Instrument
1.The pressure pipe length to diameter ratio is very big, easy to be unstable, the stress situation is more complex than the pressure vessel.
2. the fluid flow state in the pressure pipeline is complex, with little buffer space, and the working condition variation frequency is higher than that of the pressure vessel (such as high temperature, high pressure, low temperature, low pressure, displacement deformation, wind, snow, earthquake, etc.)
3.there are various types of pipe components and pipe supports, and various materials have their own characteristics and specific technical requirements, so the selection of materials is complex.
4.there may be more leakage points in the pipe than in the pressure vessel, usually five for a single valve.
5. there are many types and quantities of pressure pipes, which are quite different from pressure vessels in design, manufacture, installation, inspection and application management.
In pressure vessels and pressure piping in the process of production quality control and inspection in service field, as the safety of pressure vessels and pressure piping and the overall reliability problem increasingly prominent, the need for pressure vessel and pipeline weld defect size and defect characteristics of more accurate quantitative judgment, is becoming more and more high to the requirement of nondestructive testing.Nondestructive testing and diagnosis methods such as industrial endoscope have been paid more and more attention.The purpose of regular testing during use is to find out whether there are new defects in the use process, and timely remind users to repair the equipment, so as to ensure the safety of equipment and personnel.
Widely used in power station boiler header, petrochemical, gas pipeline, main steam pipeline, ship construction, aerospace and other fields, is the industrial overhaul of the essential choice!
Can effectively and timely discover the internal defects of the anti-wave plate and tank body.
Industrial crawling robot can check the internal pipeline is not co
crrosion, rust, iron particles, welding cracks and other quality problems.Observe their cracks. When the robot's beam hits the detected object's surface, the workers can conclude that there are cracks in the internal structure if they see black or bright lines with certain magnification and irregular edges around the lines.
If the internal structure corrosion phenomenon, when the light down, you will find a lot of lumpy, spotty surface structure.When magnified by a certain amount, it will show surface roughness.
Industrial crawling robot can check the internal pipeline is not corrosion, rust, iron particles, welding cracks and other quality problems.
Observe their cracks. When the robot's beam hits the detected object's surface, the workers can conclude that there are cracks in the internal
structure if they see black or bright lines with certain magnification and irregular edges around the lines.
Industrial endoscope is a kind of testing instrument made according to the principle of optical imaging.
Application : petrochemical, municipal, urban construction, national defense and other fields, lightweight and portable, efficient detection.
Suitable for small pipeline inspection,smallest pipeline diameter 130mm. distance(0-200m) .
Pipeline endoscope has the characteristics of light and strong, easy to control, easy to cross obstacles and easy to disassemble.
Pipeline endoscope is generally composed of several parts, such as controller, lifting platform, camera, cable, crawler, lighting, remote control clutch, etc.
Among them, the lifting platform of remote control to adjust the height of the camera, guarantee the lens keep moderate position in pipe, the spider can turn freely through them,
and remote control clutch can release the wheels retracted the spider, handheld controller can complete lift platform, clutch, lighting, focal length, direction and speed control.
Duct endoscopy is common things in our daily life, air-conditioning pipes, gas pipes, engine and pressure vessel, etc., as the growth of the pipe using time, pipeline will gradually accumulate dirt inside, inside weld, also will become increasingly serious corrosion, in order to understand the status of these pipes, usually can use the member - duct endoscopy in the industrial endoscope for nondestructive testing.
Actual pipeline endoscope can not only detect the tap water pipeline leaking point and intercepting can also detect scale deposition in tap water pipe, can be done according to the requirements of the water company use within the pipeline monitoring, water companies in addition to the regular monitoring of water quality, timing of pipeline internal condition monitoring is also very important, duct endoscopy has photos video recording, after every test can keep photos and video data, when again detection can be compared, so the data more accurate.Therefore, water companies have been popularizing the installation and use of endoscopes in order to seek more efficient management and monitoring methods.
Endoscope pipe inspection robot camera systemTechnical Features:
1. Splash-proof,anti-corrosion,can be used in different place.
2. Forward ,backward,turn freely and adjustable speed.
3. With ambient light and adjustable illumination.
4. Lens 360°rotation and reversal without death angle.
5. Focus length is adjustable ,no limited by space size.
6. Video,photo can be set at will.
7. Video can be storage and replay.
8. The machine is easy to clean, low cost maintenance.
Endoscope camera robot wheel made of copper and stainless steel ,with skid-resistance tooth.
PortablE electronic endoscope: jiutai portable electronic endoscope is a new nondestructive testing instrument that integrates light, machine and electricity to check, detect and analyze the internal quality of the cavity.Through CMOS photoelectric coupler, high brightness LED lighting source, industrial level LCD monitor, SD card storage and other components.Jiutai handheld electronic endoscope lens small, easy to carry.Generally, it is 2mm, 2.8mm, 3.9mm, 5.5mm, 6mm and 8mm.The lines range in length from 0.5 m to 10 m.It is applied to the detection of fine parts, such as mechanical casting, automobile maintenance, aircraft maintenance, etc., which cannot be directly observed by human eyes.Through front lens imaging, the internal structure of the detection part is finally displayed through the display screen to achieve the detection purpose.
Pipeline endoscope: compared with electronic endoscope, jiutai industrial pipeline endoscope mainly focuses on long detection distance, wide detection range and strong lens care.Generally, the large lens of the endoscope can be adjusted to focus, rotated to 360° and flipped to 220°, so that no dead Angle can be detected.The detection distance can be up to 5 meters to 100 meters.Pipeline endoscope is generally used to test the header and water wall of power plant boilers and other large pipelines. The detection line of pipeline mirror is relatively hard, so the lens can be pushed directly into the tube with the help of lens diameter changing device, and the lens can be kept in the pipeline for easy detection.
Drain Pipe Inspection Robot Camera
Industrial Endoscope,Pipeline inspection camera,Pipe endoscope Inspection Camera,Endoscope Camera,Android Pipe Inspection Camera,Pipeline inspection endoscope camera,Inspection endoscope camera for pipeline,snake inspection camera,inspection camera,Pipe Inspection Camera,Sewer Pipe Camera ,Drain Pipe Inspection Camera,drain inspection camera,underwater inspection camera,Industrial Robot,pipe robot crawler,Pipe Inspection Crawler Robot, Pipe Inspection Robot ,Snake Inspection Camera,video inspection camera ,Borescope,
It was originally introduced from medical endoscope and has been developed till now.
It is usually divided into three types: electronic endoscope, pipeline endoscope and pipeline crawler.
Users can choose different products according to different application environments.
Multi-function camera lenses wiht camera cover to protect the camera lens from damage.
Industrial Endoscope Inspection Robot Camera System Accessory
Crawling Robot Camera Parameter :
| Camera Type | CCD |
| Pixel | 480000 |
| Camera lens Diameter | 51mm |
| Rotate Model | 360° Infinite rotating,220°radial reversal |
| Screen Size | 10 inch LCD |
Product Categories : Crawling Robot Pipe Inspection